DNYSYSJ Acrylic Polisher, 75L/H Portable Oxygen Hydrogen Gas Flame Generator Torch Water Welder, 1 Gas Torch

Designed to Polish the material which made from Acrylic and can only melt small metal as needle tipsSpecifications· Input Voltage：AC110V· Maximum Output Gas：75L / H· Operation Gas Pressure：0.08-0.13Mpa· Ambient Temperature：-10°C ∼ 40°C· Flame Temperature：≥2800°C· Water Consumption (L / H)：0.015 L / H· Flame Gun:Single· Capacity：1.6L.Fuel Ratio: 1L water: 250g electrolytic powderPackage includes:- 1 x Machine- 1 x Flame Gun- 1 x Plastic funnel- 1 x Rubber Tube- 1 x Power cableDescription:· Synthetic glass (acrylic) polishing, oxygen hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright.· The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright.· It is using high temperature flame to make acrylic edge smooth and bright.Features:· Take water (Distilled water and pure water) as fuel;· "low working voltage, cut off automatically beyond the set voltage" design;· Improved model from APM-H60;· Its electrolysis adopts series and parallel compound technique.Economical, environmental protection, fuel obtained easily;· The design makes the machine safer and save more energy;· The New Model No. is APM-H160, and its maximum output gas is up to 75l / h;· The electrolysis is more efficient.

• FUNCTIONS: Oxygen hydrogen generator extracts oxygen and hydrogen through electrolysis of water. Hydrogen as a fuel, oxygen combustion. Using high temperature flame to make acrylic edge smooth and bright. The heat polishing on the acrylic rough surface can be achieved as long as the flame passing by gently, and the acrylic products will become glittery and bright without affecting or damaging arts
• EFFICIENT ELECTROLYSIS: Its electrolysis adopts series and parallel compound technique. The electrolysis is more efficient, and its maximum output gas is up to 75 l / h. Input Voltage: AC 110V, Maximum Output Gas: 20 gallon per hour, Operation Gas Pressure: 0.08-0.13Mpa, Ambient Temperature: 15°F~105°F, Flame Temperature: ≥5070°F, Water Consumption: 0.5 fl oz per hour, Flame Gun No.: Single, Capacity: 54 fl oz
• TAKE WATER (DISTILLED WATER AND PURE WATER) AS FUEL: Economical and practical, fuel obtained easily. Energy saving, environmental friendly, safe and reliable. Low working voltage, cut off automatically beyond the set voltage design, makes the machine safer and save more energy. Ratio: 1 liter Water：250g Electrolytic Powder. **Electrolytic powder NOT included**
• APPLICATIONS: Polish irregular acrylic surface. Heat treatment for metal parts. Weld the hinge of spectacles rim. Fuse the lead or tin alloy plate for storage battery. Cut and fuse quartz or fine parts etc. Peel off FPC of computer, fuse LED chip and thermocouple. Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc
• SHIPPING LISTS:1 x Machine, 1 x Flame Gun, 1 x Plastic funnel, 1 x Rubber Tube, 1 x Power cable. Strong and durable, light weight and portable(11"L x 18W x 14"H), safe and reliable. If you have any questions or concerns, please do not hesitate to contact us!